Jepson Bolton's International Catalogue
FLAME PHOTOMETERS
Flame Photometers Jenway
A low temperature single channel flame photometer designed for routine
determinations of sodium and potassium; additional filters are also available
for lithium, calcium and barium The unit provides digital display of
concentration down to 0.1 ppm and an electronic flame-failure device
ensures safe operation. The unit will operate on propane, butane or natural
gas. Supplied without gas regulator or air compressor.
Specification
Concentration range 0 to 199.9 ppm
Sensitivity:
Na, K 3 to 100 ppm
Li*,Ca* 5 to 100 ppm
Ba* 100 to 200 ppm
Reproducibility 1 %
Recorder output 1.00V for readout of 100
Dimensions lxwxh 300 x 420 x 360 mm
Weight 8 kg
Electrical requirements 240V 50Hz
*Available as accessories
Ordering information
F35-100 Flame photometer Jenwaymodel PFP7 - £1946.70
Accessories
0F35-110 - Calcium filter - £54.00
F35-112 - Barium filter - £54.00
F35-114 - Lithium filter - £54.00
NB. It is recommended that these filters are factory fitted at time of ordering.
F35-120 - Air compressor 6 Itr/min,1 kg/cm2 (14 psi) - £319.50
F35-130 - Propane regulator - £135.00
F35-132 - Butane regulator - £135.00
F35-134 - Natural gas regulator - £36.90
F35-136 - Water separator - £85.50
F35-138 - Dust cover - £32.40
F35-140 - Cleaningsolution.Packof11tr - £50.40
F35-142 - Minorspareskit - £166.50
F35-144 - Majorspareskit - £1066.50
Clinical Reagent Calibration Standards
Concentration Pack qty
Element mmol/ltr ml Pack
F35-150 Li 1 00 500 £32.40
F35-152 Na + K 100Na + 100K 500 £32.40
F35-154 Na + K 140Na t 5K 500 £32.40
F35-156 Na + K 120Na + 2K 500 £32.40
F35-158 Na + K 160Na + 8K 500 £32.40
F35-160 Na + K 160Na + 80K 500 £32.40
Industrial Reagent Calibration Standards
Concentration Pack qty
Element ppm ml Pack
F35-162 K 1000 500 £32.40
F35-164 Li 1000 500 £32.40
F35-166 Ba 3000 500 £32.40
F35-168 Na 1000 500 £32.40
F35-170 Ca 1000 500 £32.40
* To request further information please Email
enquiry@jepbol.com
