Jepson Bolton's International Catalogue

Melting Point Apparatus - Analogue

  • SMP11

  • Easy to operate - ideal for educational use
  • Supplied with safe spirit filled thermometer
  • Economical price

    With new safety features and easy to use, the SMP11 is ideal for use in education.

    Supplied with a safe, spirit filled mercury free thermometer, the low toxic blue spirit will not pose a health hazard in the event of a breakage. Easy to follow instructions are printed directly on to the apparatus and are available in most European languages.

    With a manually adjustable heating rate, the SMP11 will rapidly heat samples up to 20°C per minute to the melt temperature and up to the maximum temperature of 250°C. Accurate readings to within 1°C of the melt temperature can be achieved by using a slower heating rate of between 1 and 10°C per minute.

    Up to three samples can be viewed and tested at any one time. Samples are illuminated by a bright white LED and viewed via a magnifying lens. The magnifying lens can be detached for cleaning using the simple to follow instructions printed on to the instrument.


  • Technical Specification

    No. of samples         - Up to 3
    
    Temperature range - Ambient to 250°C
    Heating rate - 1 to 10°C/min
    Dimensions (w x d x h) - 370 x 140 x 110 mm
    Net weight - 1.7kg
    Electrical supply - 230V, 50Hz, 50W

  • Ordering Information

    Model  	 Description                                                       Cost
    
    SMP11 - Melting point Apparatus, complete with thermometer and pack of 100 melting point tubes (open both ends) - £272.88
    SMP11/1 - Spare thermometer, spirit filled, 0°C to 250°C - £19.43
    SMP1/2 - Cooling plug (brass) for rapidly reducing heating block temperature after use - £12.49

  • Melting point tubes

    Made from soda glass, these tubes are easy to seal in a Bunsen flame and break into two. Supplied in robust tube holder, pack of 100 tubes. Tube overall length is 100mm Tube diameter = 1.9mm, inner diameter = 1.3mm and wall thickness = 0.3mm.


  • Ordering information

    Model 	Tube type             Cost
    
    SMP1/4 - Open both ends - £6.94
    SMP2/1 - Sealed both ends - £14.80
    SMP10/1 - Sealed at one end - £9.25

    * To request further information please Email enquiry@jepbol.com
  • footer.gif
    Informal IT HOME CONTACT US Webmaster
    © Jepson Bolton Ltd. Site designed & maintained by Gemini Scientific Ltd
    ::: Made with CoffeeCup : Web Design Software & Website Hosting :::